Foxconn RS233

Foxconn RS233
alaScore 81

68 обзоров

Апр, 2018

Сервисом alaTest было собрано и проанализировано 68 обзоров для Foxconn RS233. Средняя оценка этого товара 4.5/5, в сравнении со средней оценкой 4.2/5 для других Настольные компьютеры.

Мы проанализировали оценки экспертов и пользователей, дату выпуска продукта и другие факторы. По сравнению с другими товарами из категории Настольные компьютеры, Foxconn RS233 получил alaScore™ 81/100 = Очень хорошее качество!

Анализ обзоров

(Основано на 68 обзорах)



Ниже список обзоров для этого или подобных продуктов. Если вы думаете, эта группировка не так, пожалуйста, нажмите здесь, чтобы флаг.
Подробнее на стр Ответы на Ваши вопросы.
Показаны 1 - 10 из 68 Показать обзоры: по Русский | из других стран

Обзор пользователя (

The worst case I've ever seen


Stay away, far away. Get the Antec ISK 300-150 instead. Or ANYTHING else. I've used a lot of Mini-ITX cases, and this is the worst.

Small, nicely finished. But choose your motherboard VERY carefully

Mechanically it's nice, but horribly laid out. There is no way 3.5" hard drive will fit in the front 3.5" bay. The drive must be mounted upside down on the floor of the case. And you have to thread it into that mounting point, fighting cables all the...

Фев, 2012

Обзор пользователя (

Nice little no frills HTPC case


Built with Gigabyte GA-E350N-USB3 Mini-ITX motherboard, OCZ 120gb SSD, 3.5 external multicard reader, and 5.25 samsung DVD multireader. Everything fit, but it was a real tight squeeze, I am happy with the purchase. I would certainly use it again if I...

1. Fits everything I wanted but it was a tight squeeze ; 2. Fits in my audio rack nicely - Doesn't look too garish ; 3. Runs relatively silent, fan sound is barely noticeable in a small room ; 4. Good value for the money

1. Internal 3.5" drive mount needed modified to work with an OCZ SSD I used ; 2. On/Off blue button is a little bright

Мар, 2011

Обзор пользователя (

Great case for HTPC!


In order to remove the HDD bay you must remove the front bezel to be able to remove a screw. The front bezel will tilt slightly down and out from the top. Then pull until it releases. The bezel uses pressure clips so it is a little nerve wracking but...

Slick case, sturdy construction, 150W power supply. Good little case for an HTPC build

Didn't have clear instructions for removing the hard drive bay. Luckily someone on New Egg wrote how to do it

Янв, 2011

Обзор пользователя (



after over 1 year, working good

none so far

Дек, 2010

Обзор пользователя (

Not bad for the money


Nice case for the money. You're able to fit the components in there without too much trouble

The motherboard power connector is VERY short! Pay attention to where this connector is on your board. If it is not close to the front left of your motherboard it probably will not reach. Also some of the screws were over tightened. They stripped when...

Дек, 2010

Обзор пользователя (

Works, but not as advertised


The PSU has 2 holes the same size in the end that the main power cables come through. For how it mounts it was in the top hole. I opened the PSU case and ran the wires through the bottom hole. This gave me a little more room to clean up the connections...

This is a very easy to work on little case. The drive bays are on pins and once you remove two front screws, both bays lift out as one piece. The front panel is easy to get on/off and it's wired up fairly well. Comes with a 3 pin fan on the side ; The...

The specs say that it has a 3.5" HD bay. While true, you will never fit a normal sized HD in this case with the stock flex power supply. I barely fit the 2.5" HD and the adapter for it. There is no documentation with it at all

Окт, 2010

Обзор пользователя (

Love it for wife's nettop


I built this with a reused HDD and a new atom based mobo. For about $300 I got a nice nettop for my wife who simply wants a little quiet computer up out of the way so the kids don't hit the buttons. I had no problem getting a SATA HDD, SATA DVD burner,...

Nice, small size. 3.5" external slot which I use for a card reader. Good quality, quiet PSU. Heavy duty external sheet metal with nice fit. Looks good vertical on the desk next to the PC

I didn't get a manual and couldn't find one online. It took me a while to figure out you needed to take the front panel off to take the drive cage out. I was a little nervous taking off the front panel (afraid I would break a plastic tab, but I...

Окт, 2010

Обзор пользователя (

Sleek, solid mini-itx tower


No manual, but you won't need one. This is my first build and I got through it fine. One screw to take off the side plate, pop off the bezel, then 2 more to remove the drive bay cage. Easy.

Stylish-looking ; Feels solid ; Well-ventilated, good case fan

Gets very cramped (to be expected) ; Mounting internal 3.5" components feels a bit sketchy and unstable (seems like there are only 2 screws to work with? on the same side?) -1 egg

Окт, 2010

Обзор пользователя (

Awesome case for D510 build


The best mini ITX case I have seen, and I looked at a lot of cases! I did not flip fan as other reviewers have advised. In my case, I could not keep two hard drives cool this way. Instead, I have both PSU and 80mm fan blowing out of case. I sealed top...

Very well designed, discrete looking, compact, but roomy inside ; Fits D510MO motherboard ; Room for two 3.5" drives, one in internal 3.5" HDD bay, one in 5.25" bay with adapter ; Builtin PSU seems to work ok

Power cables are an inch too short to fit power connector on D510MO without stretching across CPU heatsink. I have an extension on order to fix this but it shouldn't be necessary ; It would be nice if PSU was 80+ rated

Авг, 2010

Обзор пользователя (

Nice overall, but difficult to work with


Case looks great, built well

If you want to buy this case, you have to find a motherboard that matches. Because the DVD drive sits on top of a good section of the motherboard, you can't get components that are too tall ; I bought the GIGABYTE GA-H55N-USB3. With that motherboard,...

Авг, 2010

Похожие Настольные компьютеры

  • Одинаковый
  • Одинаковые